BPLCD - M1, THREADWELL CUTTING TOOLS HIGH SPEED
- MSDS: BPLCD
- Manufacturer: BESLY PRODUCTS CORP
- Product Name: M1, THREADWELL CUTTING TOOLS HIGH SPEED
- National Stock Number: 9510-00N017011
Product Identification
Product ID:M1, THREADWELL CUTTING TOOLS HIGH SPEED
MSDS Date:11/01/1985
FSC:9510
NIIN:00N017011
MSDS Number: BPLCD
Responsible Party
SOUTH BELOIT, IL 61080
US
Emergency Phone: 815-389-2231
Info Phone: 815-389-2231
Cage: 92061
Contractor
Telephone: 815-389-2231
Cage: 92061
Ingredients
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
HIGH TOX VIA INTRAPERITONEAL & INHAL
RTECS: 9999999ZZ
TOX VIA INTRAPERITONEAL & SUBCUTANEOUS ROUTES.
RTECS: 9999999ZZ
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 3.8%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON (III) OXIDE; (IRON)
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: BALANCE
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 0.25%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
MOLYBDENUM (PEL/TLV AS MO, INSOLUBLE COMPOUNDS)
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 8.7%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
VANADIUM PENTOXIDE; (VANADIUM) (SARA III)
CAS: 1314-62-1
RTECS: YW2460000
Fraction By Weight: 1.15%
OSHA PEL C,0.5 MG/M3
ACGIH TLV: 0.05 MG/M3RDUST;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CARBON BLACK; (CARBON)
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 0.83%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
TUNGSTEN (PEL/TLV AS W, INSOLUBLE COMPOUNDS)
CAS: 7440-33-7
RTECS: YO7175000
Fraction By Weight: 1.6%
OSHA PEL 5 MG/M3;10 STEL
ACGIH TLV: 5 MG/M3;10 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PROD IN SOLID FORM DOES NOT CONSTITUTE
PHYSICAL HAZ/HLTH HAZ. SUBSEQUENT OPS SUCH AS ABRADING,MELTING,
WELDING, CUTTING/PROCESSING IN ANY OTHER FASHION MAY PRODUCE
POTENTIALLY HAZ DUST/FUME WHICH CAN BE INHALED, SWALLOWED, OR COME
IN CONT W/SKIN/EYES. ACUTE: METALLIC TASTE; NAUS, TIGHTNESS OF
CHEST;(EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:CHROMIUM: GROUP 1 (IARC), GROUP 1 (NTP).
Effects of Overexposure:HLTH HAZ: FEVER; IRRIT OF EYES, NOSE, THROAT &
SKIN; LOSS OF CONSCIOUSNESS/DEATH DUE TO WELDING GASES/LACK OF O*2.
CHRONIC:NO ADVERSE EFTS FROM PRODS IN SOLID FORM. ADVERSE EFTS
MAY/MAY NOT RSLT FROM LONG-TERM EXPOS TO DUST, FUME, GASES, ETC.
BY WAY OF SUBSEQUENT OPS ON PROD. CARBON: NUISANCE DUST. (SUPP
DATA)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. IF CONDITION CONTINUES, CONSULT
MD. EYE: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15 MINUTES TO
REMOVE PARTICULATE. GET MEDICAL ATTENTION. SKIN: BRUSH OFF EXCESS
DUST. WA SH AREA WELL WITH SOAP AND WATER. INGEST: SEEK MEDICAL
HELP IF LARGE QUANTITIES OF MATERIAL HAVE BEEN INGESTED.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATIONS OF DUSTS AND TO KEEP AIRBORNE DUST
CONCENTRATIONS AT A MINIMUM.
Other Precautions:MATL IS POTENTIALLY CONTAMD W/COATINGS SUCH AS OILS
FOR PRESERVATIVES & OTHER CONTAMINANTS. IF MATL IS CONTAMD, SPECIAL
PRECS (SUCH AS PROCESS CONTROL & PERSONAL PROT EQUIP APPROP TO
NATURE OF SUSPECT ED CONTAMINANTS SHLD BE TAKEN(SUPP DATA)
Exposure Controls
Respiratory Protection:IF FUMES, MISTING/DUST CONDITION OCCURS AND TLV
IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GENERAL: RECOMMENDED (TO KEEP AIRBORNE CONCENTRATION OF
DUST & FUMES BELOW ACGIH TLV'S). LOCAL: AS REQUIRED.
Protective Gloves:AS REQUIRED. IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:TO AVOID RSLTG EXPOS WHEN HNDLG, CUTTING
(THERMAL/MECHANICAL) &/HEATING/MELTING. HLTH HAZ:CHROMIUM:HIGH PULM
TOX & EXPERIMENTAL CAUSE OF NEOPLASM(S). IRON:DUST CAN CAUSE
CONJUNCTIVITIS, CHO ROIDITIS, RETINITIS, & SIDEROSIS OF TISS. OXIDE
FUME CAN CAUSE CHRONIC BRONCHITIS. (ING 9)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, ODORLESS METAL.
Stability
Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.
Disposal
Waste Disposal Methods:SOLIDS: SALE AS SCRAP FOR REUSE. DUST, ETC.:
FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.